7 votes

Chrome LOVE Revolution Car Emblem Project Has Been Funded! 10% of Profits Towards Other Liberty Projects!

UPDATE 11/21/12 - Received this today! https://www.facebook.com/photo.php?fbid=494663057234480

So there's been a little delay, but the molds are finished and parts are being run now! Buy one here if you're interested: www.revolutioncarbadges.com

UPDATE 09/22/12 - I received a sample from the manufacturer that shows the quality of the product we'll receive. It looks awesome!

http://photos-h.ak.fbcdn.net/hphotos-ak-ash4/s720x720/391653...

UPDATE 09/19/12 - This project has been funded. Artwork has been approved, and they are now in production! Expected arrival date is mid-November! Get your chrome LOVE Revolution car emblems while they are available! I've only ordered 300 of them at this time! Keep up with the project at: https://www.facebook.com/RevolutionCarBadges

Order one at www.RevolutionCarBadges.com

3D ARTWORK:

http://imgur.com/am44g

https://www.facebook.com/photo.php?fbid=469175513116568&set=...

ORIGINAL POST:

So in less than a month, I was able to pre-sell enough units and raise enough money to begin the Revolution Car Badge Project! Make sure to reserve yours now, because at this time, I'm only ordering 300 units to begin with. They will take about 8 weeks to produce, and I will hopefully place the order this week after artwork is approved.

What is the Revolution Car Badge Project?!

Check it out: www.RevolutionCarBadges.com

It will look very similar to this: http://imgur.com/KBLFO

These are NOT the cheap, hot-stamped car emblems that tarnish over time like these: http://imgur.com/BJrd3

These will be produced using ABS high-impact injection molded plastic, will have a 3D curved top surface, and will be similar in look to this: http://imgur.com/1VDUE (without the pattern in the red)

Reserve yours today!

Keep up with the project at https://www.facebook.com/RevolutionCarBadges

Here's the original DP post on the project.

For Liberty,

Rob



Trending on the Web

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

just ordered one

i hate living in the same state as you, lol

https://twitter.com/#!/Agonzo1

Being a big car guy, I want

Being a big car guy, I want one...but I dont want plastic(plastic badges always suck). If you can get a set made from metal...preferrably polished aluminum I would be in.

Hey wicked!

I understand your concerns, but I did quite a bit of research on these before I decided on which vendor to choose.

These will be the same quality that EVERY car manufacturer uses to add their badges on factory vehicles....like TAURUS or TOYOTA. All those are ABS plastic injection molded pieces which are then chromed.

Generally the crappy plastic car badges which always do suck (I agree) are the hot-stamped ones like these: http://imgur.com/BJrd3

Those always fade and tarnish.

Mine are injection molded, not hot-stamped. They are the same type found on all cars: http://imgur.com/1VDUE

I hope this helps! But yeah, it's not going to be like a Chevelle SS metal badge! That would be awesome though!

I'm a serial entrepreneur and liberty activist from Texas!

www.RevolutionCarBadges.com
www.NonNetwork.com

Aluminum is the way to

Aluminum is the way to go...you annodize the "love" red and rest clear. Plastic chrome always flakes and just feels and looks like plastic. I am very particular on what I put on my cars. I remove the factory badges that are plastic even. Regardless, let me know if you ever decide to run an aluminum batch. I would of course pay a premium for the better quality. I have a debadged Merkur XR4Ti that it would go great on...but I cant do plastic.

Understood!

We're all a little particular on certain things! No problem. I doubt I'd be able to raise enough capital and interest to produce an aluminum version, but if I do, I'll let you know! They'd probably be too expensive for most of us! If you change your mind, let me know!

Rob

I'm a serial entrepreneur and liberty activist from Texas!

www.RevolutionCarBadges.com
www.NonNetwork.com

Project update!

Received this today!

https://www.facebook.com/photo.php?fbid=494663057234480

Buy one here if you're interested: www.revolutioncarbadges.com

I'm a serial entrepreneur and liberty activist from Texas!

www.RevolutionCarBadges.com
www.NonNetwork.com

Quality sample received!

UPDATE 09/22/12 - I received a sample from the manufacturer that shows the quality of the product we'll receive. It looks awesome!

http://photos-h.ak.fbcdn.net/hphotos-ak-ash4/s720x720/391653...

I'm a serial entrepreneur and liberty activist from Texas!

www.RevolutionCarBadges.com
www.NonNetwork.com

Final artwork has been approved! Order has been placed!

Final artwork has been approved and the Chrome LOVE Revolution Car Emblems are now in production! They should arrive around mid-November. Thanks for everyone's help in bringing this idea from concept to customer! I'll keep everyone updated via the Facebook page: https://www.facebook.com/RevolutionCarBadges

Here are some screenshots of the final approved 3D artwork:

https://www.facebook.com/photo.php?fbid=469175513116568&set=...

http://imgur.com/am44g

Order one NOW at www.RevolutionCarBadges.com

For Liberty,

Rob

I'm a serial entrepreneur and liberty activist from Texas!

www.RevolutionCarBadges.com
www.NonNetwork.com

3D final artwork should be ready on Monday....fingers crossed!

From Vendor Regarding Final 3D Artwork: "I will have it for you Monday!"

So I'll let y'all know when the order is actually placed, and I'll provide documentation to prove they are actually on order along with the final artwork! Thanks for everyone's continued patience! If you haven't ordered one yet, please visit www.revolutioncarbadges.com! Get some for your friends for Christmas! The should arrive around mid-November.

Rob

I'm a serial entrepreneur and liberty activist from Texas!

www.RevolutionCarBadges.com
www.NonNetwork.com

Updated artwork!

http://revolutioncarbadges.files.wordpress.com/2012/09/love-...

I'm working with the vendor this week to get this artwork approved!

I'm a serial entrepreneur and liberty activist from Texas!

www.RevolutionCarBadges.com
www.NonNetwork.com

Cool idea, but will wait until they

are actually available.

No problem!

I completely understand...

I'll be posting updates about the production status on the Facebook page if you'd like to keep up: https://www.facebook.com/RevolutionCarBadges

I can assure you this project will come to fruition! I have enough money to fund the first production run of at least 300 units, and I want one really bad! This will happen!

Not claiming I have a lot of street cred here, but check out my previous posts here on the DP and check out the About Me page on my website for more info about who I am.

Maybe you've seen these pics circulating from the RNC:

Pic 1
Pic 2

I work with these guys in Texas, and was part of the Texas group that you may have heard about from the RNC that stood up to the establishment.

I want people to feel comfortable and confident with their purchase, but I completely understand your hesitance considering the current stage of this project...

I'm a serial entrepreneur and liberty activist from Texas!

www.RevolutionCarBadges.com
www.NonNetwork.com

Monday morning bump!

I'll be working with the vendor early this week to finalize artwork and submit the order for the first production run. Make sure to claim one!

I'm a serial entrepreneur and liberty activist from Texas!

www.RevolutionCarBadges.com
www.NonNetwork.com